The doseBadge5 uses a set of LED indicators to show the status of measurements, charging, calibration and general operation.
Four LEDs (orange, green, blue and red) are used in combination to show the current status and activity of the instrument as follows.
Where an LED is flashing, this is shown as Flash Time/Period. For example, 0.1/2.0 is one short flash of 0.1 second every 2 seconds and 0.1/5.0 is one short flash of 0.1 second every 5 seconds.
doseBadge5 on the Charging Dock
| Status | Left LED | Right LED | Notes |
| Badge charging | Solid orange | ||
| Badge fully charged | Solid green | ||
| Badge charging and measuring | Solid orange | Flashing blue (0.1/2.0) | |
| Badge charged and measuring | Solid green | Flashing blue (0.1/2.0) | |
| Badge charging and memory full (or badge error) | Solid orange | Solid red | |
| Badge charged and memory full (or badge error) | Solid green | Solid red | |
| Calibration successful | Solid blue (5 seconds) | The badge will revert to the previous indication after 5 seconds | |
| Calibration failed | Solid red | The badge will revert to the previous indication after 5 seconds | |
| Instrument start-up | Solid orange | Approximately 1 second |
doseBadge5 undocked
| Status | Left LED | Right LED | Notes |
| Badge on (not measuring) | Flashing green (0.1/2.0) | ||
| Badge measuring | Flashing blue (0.1/2.0) | ||
| Badge measuring & dose threshold exceeded | Flashing red (0.1/2.0) | ||
| Badge paused | Flashing blue (0.1/5.0) | ||
Badge paused & dose threshold exceeded | Flashing red (0.1/5.0) | ||
| Battery low (not measuring) | Flashing orange (0.1/2.0) | ||
| Battery low & measuring | Flashing orange (0.1/2.0) | Flashing blue (0.1/2.0) | Alternating flashes |
| Battery low & paused | Flashing orange (0.1/5.0) | Flashing blue (0.1/5.0) | Alternating flashes |
Battery low, measuring & dose threshold exceeded | Flashing orange (0.1/2.0) | Flashing red (0.1/2.0) | Alternating flashes |
Battery low, paused & dose threshold exceeded | Flashing orange (0.1/5.0) | Flashing red (0.1/5.0) | Alternating flashes |
| Calibration successful | Solid blue (5 seconds) | The badge will revert to the previous indication after 5 seconds | |
| Calibration failed | Solid red (5 seconds) | The badge will revert to the previous indication after 5 seconds | |
| Instrument start-up | Solid orange | Approximately 1 second |
Error conditions or warning indications
| Status | Left LED | Right LED | Notes |
| Memory full | Solid red | Connect to NoiseTools to download & clear measurements | |
| Badge error | Solid red | Connect to NoiseTools to confirm status |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article